||Serving the modeling community
for over 20 years.
Feigao 6 Amp Brushless Speed Control
| Feigao 6-Amp Brushless Speed Controller
- Programmable through transmitter or with program card (sold separately)
- Hard/soft cut off
- 3 Li-polly Auto-cutoff voltages - 2.5V/2.75V/3.0V per cell
- Normal/Soft/Super-Soft startup
- Low/Medium/High timing
- Safe start requires throttle stick to be fully down in order to arm motor
- Alerts you to when battery pack voltage is out of range or when throttle signal is out of range
- Auto throttle shutoff on loss of signal
- Thermal overload protection
- Failed startup protection - automatically cuts power if motor fails to start
- Weight: 5.3 grams / 0.19 oz.
- Size: 29 x12 x 6 mm / 1.14 x 0.47 x 1.23 in.
- Constant Current: 6A
- Maximum Current: 8A / 10 Sec.
- Bec: 0.8A
- Timing: Low/Medium/High
- Input: 2-3 cell Li-Poly or 5-9 Ni-MH
- Low-Voltage Cutoff: 2.5V/2.75V/3.0V per cell Li-Poly
AERO CRAFT R/C
PO Box 1474
Riverhead, New York 11901
© 2006 AeroCraftRC.com ® All Rights Reserved
Web Site developed by JS